Multiroom Button 39 on the remote. Next, press the Set Button p. Press the ⁄/¤ Buttons n to turn the multiroom feed on or off. When the multiroom system is on, the Multiroom Indicator D will light in the Main Information Display ˜, and the Lower Display Line B or OSD will display MULTI ON. Press the Set Button p to enter the setting.
When the multiroom system is turned on, the input selected using the multiroom menu will be fed to the Multiroom Audio Outputs h on the rear panel. The volume will be as set in the previous selection, although it may also be adjusted using an optional IR sensor and the Zone II remote in the remote location, or on the optional audio power amplifier connected to the Multiroom Audio Outputs h.
Once the multiroom system is turned on, it will remain on even if the AVR580 is placed in the Standby mode in the main room by pressing the Power Off Button
åor the System Power Control 2 on the front panel. To turn off the multi- room system, even when the AVR is in Standby mode in the main listening room, press the Multiroom Button 39 and then the Set Button p. Press the ⁄/¤ Buttons n so that the Multiroom Indicator D in the Main Information Display ˜ goes out, and the Main Information Display ˜ or OSD will display MULTI OFF. Press the Set Button p to enter the setting and turn the unit off.
Even when the AVR580 is turned off in the main room, the multiroom system may be turned on at any time by pressing the Multiroom Button 39 , or any of the Selector Buttons ∫ç∂ in the remote room.
40
