Jenn-Air 41007605 Installation, Materials Needed, Select Location, Cabinet Cutout Dimensions

Installation

Materials Needed

•1⁄8" Allen wrench

•5⁄16" socket

•Phillips screwdriver

•Putty knife

•Carpenter’s level

Select Location

The wine chiller was designed to be installed under the counter. Its proper location will ensure peak performance. Choose a location indoors, away from heat and out of direct sunlight. Best performance will be maintained when installed within the following parameters:

	Ideal Ambient
	Temperature Range
Built-In	........................................................65 - 80° F
	(18 - 27° C)

Provisions for electricity should be determined before placing the wine chiller in its final location (see page 2).

Cabinet Cutout Dimensions

A

B

C

UNDER COUNTER CUTOUT

A24" (61.0 cm)*

BMin. 341⁄2" (87.6 cm) Max. 351⁄4" (89.5 cm)

C241⁄8" (61.27 cm)

*If door is recessed between cabinets, cabinet cutout must be 241⁄4" (61.6 cm) in width.

Cabinet Clearance

Ventilation is required from the bottom front section of the wine chiller. Keep this area open and clear of any obstructions.

The adjacent cabinets and counter top can be built around the wine chiller as long as no top trim or counter top is installed lower than the top of the hinge.

Installation should allow for the wine chiller to be moved if service is ever required.

3