Jenn-Air JDRP536 Oven Use, Aluminum Foil, Positioning Racks and Bakeware, Extendable Roller Rack

Models: JDRP548 JDRP430 JDRP536 JDRP436

1 72
Download 72 pages 28.55 Kb
Page 17
Image 17
OVEN USE

OVEN USE

Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.

During oven use, the heating elements will not remain on, but will cycle on and off throughout oven operation.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well- ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire rack with foil because air must be able to move freely.

To catch spills, place foil on rack below dish. Make sure foil is at least ½" (1.3 cm) larger than the dish and that it is turned up at the edges.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

RACKS

Position racks before turning on the oven.

Do not position racks with bakeware on them.

Make sure racks are level.

5

4

3

2

1

BAKEWARE

To cook food evenly, hot air must be able to circulate. Allow 2" (5.0 cm) of space around bakeware and oven walls.

Extendable Roller Rack

The extendable roller rack allows easy access to position and remove food in the oven. It can be used in rack positions 1 through 4. The extendable roller rack will not fit in position 5.

Open Position

A

B

A. Extendable roller rack

B. Sliding shelf

Closed and Engaged Position

Aluminum FoilPositioning Racks and BakewareRACKSBAKEWARE A

B

A. Extendable roller rack

B. Sliding shelf

To Remove the Extendable Roller Rack:

1.Slide the rack in completely so that it is closed and engaged with the sliding shelf.

2.Using 2 hands, lift up on the front edge of the rack and the sliding shelf together. Slowly push both to the back wall of the oven so the front edge of the sliding shelf sits on the rack guide located on the sides of the oven.

The front edge of the rack and the sliding shelf should be higher than the back edge.

A

B

C

A. Sliding shelf

B. Rack guide

C. Extendable roller rack

3.Using 2 hands, lift up the back of the rack and the sliding shelf so that the back and front are level on the rack guide.

4.Pull the rack and the sliding shelf out.

To Replace Extendable Roller Rack

1.Using 2 hands, grasp the front of the closed rack and the sliding shelf. Place the closed rack and the sliding shelf on the rack guide.

2.Slowly push the rack and the sliding shelf to the back of the oven until the back edge of the sliding shelf drops.

17

Page 17
Image 17
Jenn-Air JDRP536, JDRP436, JDRP430 Oven Use, Aluminum Foil, Positioning Racks and Bakeware, Extendable Roller Rack, A B C