Jenn-Air JGR8855 warranty Before, You Call for Service, Oven will not self-clean

Before

• • • • • • • • • • • • • • • • • • • • • • •

Oven will not self-clean.

•Check to make sure controls are set properly.

•Check to make sure the cycle is not set for a delayed start.

•Check if door is closed.

Oven did not clean properly.

•Longer cleaning time may be needed.

•Excessive spillovers, especially sugary and or acid foods, were not removed prior to the self-clean cycle.

Oven door will not open after self-clean cycle.

•Oven interior is still hot. Allow about one hour for the oven to cool after the completion ofa self--c]ean cycle. The door can be opened when the LOCK indicator word is not displayed.

Moisture condensation on oven window.

•This is normal when cooking food high in moisture. Excessive moisture was used when cleaning the window.

Strong odor when oven is turned on.

•This is normal for a new range and will disappear after a few uses. Initiating a clean cycle will "bum off" the smells more quickly.

•Excessive food soils on the oven bottom. Use a self-clean cycle.

"F" plus a number appears in display.

#This is called a fault code. If a fault code appears in the display and beeps sound, press the Stop/Clear pad. If the fault code and beeps continue, disconnect power to the appliance and call an authorized servicer.

You Call for Service

• • • • • • • • • • • • • • • • • •