Venting Requirements

Installation Dimensions

A. Ceiling height

B. Hood height from ceiling to bottom of the range hood: A-C-D=B

C. 24" (61.0 cm) minimum to 36" (91.4 cm) maximum suggested hood height.

D. Countertop height

IMPORTANT:

Minimum distance “C”: 24" (61.0 cm) from electric cooking surface.

Minimum distance “C”: 27" (68.6 cm) from gas cooking surface.

Suggested maximum distance “C”: 36" (91.4 cm)

For vented installations, the chimneys can be adjusted for ceilings between 7’ 11" (2.41 m) and 9’ 11" (3.02 m).

For non-vented (recirculating) installations, the chimneys can be adjusted for ceilings between 7’ 11" (2.41 m) and 10’ 3" (3.12 m).

*NOTE: The range hood chimneys are adjustable and designed to

For the most efficient and quiet operation:

■Use a straight run or as few elbows as possible.

■Use no more than three 90° elbows.

■Make sure there is a minimum of 24" (61.0 cm) of straight vent between the elbows if more than 1 elbow is used.

■Do not install 2 elbows together.

■Use vent clamps to seal all joints in the vent system.

■Use caulking to seal exterior wall or roof opening around the cap.

■The size of the vent should be uniform.

Cold Weather Installations

An additional back draft damper should be installed to minimize backward cold air flow and a thermal break should be installed to minimize conduction of outside temperatures as part of the vent system. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the vent system enters the heated portion of the house.

Makeup Air

Local building codes may require the use of makeup air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale.

Consult your HVAC professional for specific requirements in your area.

Venting Methods

This island hood is factory set for venting through the roof.

An 8" (20.3 cm) round vent system is needed for installation (not included). The hood exhaust opening is 8" (20.3 cm) round.

NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that greatly reduce performance.

Vent system can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.

For Non-Vented (recirculating) Installations

If it is not possible to vent cooking fumes and vapors to the outside, the hood can be used in the non-vented (recirculating) version, fitting a charcoal filter and the deflector. Fumes and vapors are recycled through the top grille.

meet varying ceiling or soffit heights depending on the distance “X” between the bottom of the range hood and the cooking surface. For higher ceilings, a Stainless Steel Chimney Extension Kit Part Number W10272078 is available from your dealer or an authorized parts distributor. The chimney extension replaces the upper chimney shipped with the range hood.

■Vent system must terminate to the outside, except for non- vented (recirculating) installations.

■Do not terminate the vent system in an attic or other enclosed area.

■Do not use 4" (10.2 cm) laundry-type wall caps.

■Use metal vent only. Rigid metal vent is recommended. Do not use plastic or metal foil vent.

■The vent system must have a damper. If the roof or wall cap has a damper, do not use the damper supplied with the range hood.

Roof Venting

A. Roof cap

B. 8" (20.3 cm) round vent

Non-vented (recirculating)

A.Deflector

B.8" (20.3 cm) round vent

NOTE: Wall venting can be an option for 2-story homes.

W10274319E, W10272061 specifications

Jenn-Air, a brand recognized for its luxury kitchen appliances, continues to innovate with products designed for both functionality and aesthetic appeal. Among its offerings, the Jenn-Air W10274319E and W10272061 stand out. These two models are characterized by their commitment to quality, style, and advanced technology, ensuring an optimal cooking experience for all users.

The Jenn-Air W10274319E model showcases a sleek design that enhances any kitchen decor. One of its standout features is its powerful performance combined with energy efficiency. The appliance utilizes advanced temperature management technology, ensuring that your food cooks evenly and retains maximum flavor and moisture. This is further complemented by its intuitive controls, allowing users to easily adjust settings and monitor cooking progress.

On the other hand, the Jenn-Air W10272061 model also brings an impressive suite of features to the table. It incorporates smart technology that provides users with greater control and flexibility. Through Wi-Fi connectivity, users can access their appliance remotely, allowing for preheating, adjusting cook times, and receiving alerts right from their smartphones. This level of control not only enhances convenience but also helps in managing meal planning more effectively.

Both models are equipped with high-quality materials that not only look great but are also built to last. Stainless steel exteriors resist fingerprints and smudging, ensuring that your appliance maintains a clean appearance over time. Inside, both units offer spacious interiors with customizable configurations to accommodate various cooking styles and preferences.

Safety is another priority for Jenn-Air. Each model includes features such as automatic shut-off and child lock functions, ensuring peace of mind in a busy kitchen environment. These appliances also meet the highest industry standards for safety, providing users with an added layer of assurance.

In summary, the Jenn-Air W10274319E and W10272061 models reflect the brand's dedication to craftsmanship and innovation. With their blend of style, cutting-edge technologies, and practical features, these appliances are designed to elevate your culinary experiences while seamlessly integrating into your kitchen.

Jenn-Air W10272061, W10274319E installation instructions Venting Requirements

Models: W10274319E W10272061