User’s removing or installing a blower must be aware of the
blower access hole. Contact with the access hole must be avoided
while the blower is running to prevent injury.
Blower Replacement
If the blower has stopped running or the fault LED indicator is lit, the blower may
need to be replaced. Before replacing, the connection should be checked to ensure
that the connector is firmly seated and that there is nothing blocking the blower
blades that could cause interference.
If a blower is believed to be in a nonfunctional state, please contact the place of
purchase for repair or replacement.
The JMR part number for a replacement blower is shown below. The assembly
includes the tray along with the blower.
Model JMR Part Number
10-bay SBA-04858
FORTRAH1 Chaparral G5312 InstallationGuide Rev C 5-2
WARNING: Avoid direct contact with the blower intake access hole while the
blower is running. The blower operates at high speeds and can cause
injury.