This screen shows the Spin
up/down Unit Screen.
These commands are only
effective when using hard
disk drives. The Spin up
Unit command will power
on the target device. The
Spin down Unit command
will power off the target
device. Just as a precaution,
it is safer to spin a device
down before removing it to
prevent damage.
Part 2 FORTRA
SAF-TE Commands
This screen shows the command menu available if a FORTRASAF-TE device
ID is selected at the SCSI Device Selection Screen.
There are several commands available in the menu screen shown and they are
briefly described in the ‘Command Overview’ section.
FORTRAH1 Chaparral G5312 Installation Guide Rev C 9-5