2. Affix the extension bracket to
the rear of the unit using two
#10-32 screws. There are 3
holes in the extension bracket
for mounting. Depending on the
hole pattern that is being used in
the cabinet, two holes should
always be available for securing
the extension bracket.
3. The fronts of the rails
have three holes. Two of
the holes (top and
bottom) are used to
secure the rail to the
cabinet. The middle
hole is used to secure the
enclosure to the rail and
cabinet. Secure the front
of each rail to the cabinet
vertical rails using two
#10-32 screws for each
rail.
FORTRAH1 Chaparral G5312 InstallationGuide Rev C 7-3
Extension Bracket
Two #10-32
screws to secure
rail to cabinet.