JMR electronic G5312 - page 28

ID Settings & Option Jumpers
Refer to Chapter 4 and Chapter 9for SCSI ID settings and option jumper settings.
Controller Canister Installation
1. Remove the four cover screws on the controller canister using a Phillips head
screwdriver and lift the cover off the canister.
2. Mount the controller into the canister with four screws that are provided
inside of the canister.
3. Connect the backup battery to the controller.
4. Connect the cover fan to the controller and close the canister cover. Replace
the 6 screws from Step 1 to secure the cover.
5. Install the controller canister into the Fortra unit.
FORTRAH1 Chaparral G5312 InstallationGuide Rev C 8-2