FORTRAH1 Chaparral G5312 InstallationGuide Rev C 1-1
The 10-bay FORTRAH1 Chaparral G5312 is designed to be used with a host
system to provide a high-end RAID storage solution. The following is a summary
of the H1 Chaparral G5312 Tower and Rackmount enclosure features:
• The 10-bay FORTRAH1 Chaparral G5312 Tower enclosure supports
up to ten 3.5" HH or LP SCA 80-pin drives. It supports single-ended, and
Ultra2 (LVD) SCSI buses. This model has three SCSI channels and built-
in auto-switching SE/LVD multi-mode termination on each channel. This
SCSI RAID Tower enclosure houses one G5312 RAID controller.
• The 10-bay FORTRAH1 Chaparral G5312 Rackmount is a 19" wide,
3U (5-1/4") high rackmount enclosure that supports up to ten 3.5" HH or
LP SCA 80-pin drives. All other features are the same as the 10-bay
FORTRAH1 Chaparral G5312 Tower.
22//44//66//88//1100//1122//1155--BBaayy Product Family Features
FORTRAand StorBladeTM are families of high-end enclosures designed for
high-volume performance RAID storage solutions. The following table shows the
features of the FORTRA2/4/6/8/10/12/15-bay and StorBladeTM products:
1. Introduction2-bay 4-bay1,3 6-bay*1,3 8-bay110-bay*1,2 12-bay 15-bay*1,3 StorBlade
Number of Device Bays 2 4 6 8 10 12 15 4
Number of Blowers 1 1 1 or 2 2 2 2 2 2
Number of Power Supplies 1 1 1 or 2 2 2 2 2 1 or 2
Number of I/O Channels (SCSI Only) 1 1 2 2 2 2 2
SCSI SE/LVD Supported
2 2 2 2 2 2 2
Fibre Channel Supported
2 2 2 2 2 2
Hot-Swap Canisters
2 2 2 2 2 2 2 2
Removable Power Supplies
2 2 2 2 2 2 2
Fibre only
Removable Blowers
2 2 2 2 2 2 2
Fibre Only
N+1 Power Supplies
2 2 2 2 2
Fibre only
N+1 Blowers
2 2 2 2 2 2
MIA Support (FC Only)
2 2 2 2
Loop Expansion Support (FC Only)
2 2 2 2 2 2
Daisy Chainable (SCSI Only)
2 2 2 2 2 2
Built-in Termination (SCSI Only)
2 2 2 2
Auto Termination (SCSI Only)
2 2 2 2
SAF-TE/SES Ready (Optional)
2 2 2 2
Fibre only
SAF-TE/SES Compatible
2 2 2 2
Fibre only
SCSI to SCSI RAID Support
2 2 2 2
Fibre to SCSI RAID Support
2 2
Fibre to Fibre RAID Support
2 2 2
Fibre to ATA RAID Support
2
SCSI to ATA RAID Support
2
(D)esktop/(T)ower/(R)ackmount D D DTR TTR RTR R
* 6/10/15-bay unit features apply to both Tower and Rackmount models
1 Features are based on a standard configuration with no internal host controller(s) installed
2 Fibre channel 10/15-bay enclosures have built-in SES
3 Fibre Channel 2Gb Model available. 2Gb models use SFP transceivers.