John Lewis JLBIOS603 Safety and Energy Saving Functions, To Programme the Oven to Switch Off

To Programme the Oven to Switch

Off

1)	Carry out the "Cooking Duration" setting as described
	in the relevant chapter.
2)	Press Time functions button until the "End of Cooking"
	function	is selected and the relevant symbol flashes.
	The control panel will display the end of cooking time
	(that is, the actual time + cooking duration time - Fig.
	13).
3)	Press button “ “ to select the required end of cooking		Fig. 13
	time.

4)After this is set, the programmer will wait 3 seconds and then start running.

5)The oven will switch on and off automatically.The end of cooking will be marked by an acoustic alarm.

6)To switch off the acoustic alarm, press button .

To cancel the programme, simply cancel the

Duration Time.

Safety and Energy Saving Functions

Safety Cut-Off Function

The oven will switch off automatically if any change of setting is made, according to the table below (Fig. 14).

If temperature setting is:	the oven will switch off:
250°C	after 3 hours
from 200 up to 245°C	after 5,5	hours	Fig. 14
from 120 up to 195°C	after 8,5	hours
less than 120°C	after 12 hours

Residual Heat Function

WhenaCookingDurationtimeisset,theovenwillautomatically switch off a few minutes before the end of the programmed time, and use the residual heat to finish your dishes without energy consumption. All current settings will be displayed until the Cooking Duration time is over.

This function will not operate when the Cooking Duration time is less than 15 minutes.

Child Safety Function

To avoid children switching on the oven, it is possible to lock the oven controls.

1)	Turn off the oven by pressing button		.
2)	Press Oven functions and “	“ buttons at the same time
	and keep them pressed for about 3 seconds.An acoustic
	signal will be emitted and the indication ‘SAFE’ will
	appear on the display (Fig. 15).

3)The oven is now locked. Neither oven functions nor temperatures can be selected.

To unlock the oven:

Press Oven functions and “ “ buttons at the same time and keep them pressed for about 3 seconds. An acoustic signal will be emitted and the indication ‘SAFE’ will go off. The oven can now be operated (Fig. 16).

Fig. 15

Fig. 16

13