Clean the oven door glass with warm water and a soft cloth only. Never use harsh abrasives as they could damage the special
Once the cleaning is carried out, refit the oven door, following the procedure in reverse.
The two pieces of glass in the middle have been specially treated to resist heat. They are marked with a small dot located on a corner and a black frame respectively.
It is important that, when refitting the oven door, the two inner pieces of glass are fixed in the right position.
To check if this operation has been carried out correctly, when inserting the glass, make sure that the surface of the glass marked with a black frame looks upwards and that the dot is located on the upper right corner of the glass (diagram 7).
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panels may shatter.
If the door glass panels become chipped or have deep scratches, the glasses will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Repair agent who will be pleased to advise further.
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the following specifications:
-Electric power: 40 W,
-Electric rate: 230 V (50 Hz),
-Resistant to temperatures of 300°C,
-Connection type: E14.
These bulbs are available from your local Repair agent.
!To replace the faulty bulb:
1.Ensure the oven is disconnected from the electrical supply.
2.Turn the glass cover anticlockwise.
3.Remove the faulty bulb and replace with the new one.
4.Refit the glass cover.
5.Reconnect to the electrical supply.
7 . |
26
