How to use the pyrolytic cleaning function
Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that the oven is empty. Do not leave anything inside it (e.g. pans, grids, baking tray, dripping pan, etc.) as this could heavily damage them.
Ensure that the oven door is closed before activating the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is advisable not to use a hob if it is fitted above the oven. This could cause overheating and damage to both appliances.
During the pyrolytic cleaning cycle the oven door becomes hot. Children should be kept away until it has cooled.
Before activating the pyrolytic cleaning function, remove the shelf supports.
To remove the oven shelves and the shelf supports proceed as follows:
1)remove the front screw while keeping the shelf support in position with the other hand (see diagram 1);
2)disengage the rear hook and take off the shelf support (see diagram 2);
3)once the cleaning is carried out, refit the shelf supports following the procedure in reverse.
Please, ensure the retaining nuts are secure when refitting the shelf support.
The following pyrolytic levels are available:
Pyrolytic 1 (P I) time : 2 h = 30 min
Pyrolytic 2 (P 2) time : 2 h 30 min. = 30 min
The pyrolytic duration time cannot be changed.
!Toas follows:activate the pyrolytic cleaning function proceed
1.Press button 
to switch on the oven. Press the Oven functions button as often as necessary until the pyrolytic
function symbol 
(level 1 - P I) appears in the display (Fig. 19).
Simultaneously the symbol indicating the shelf supports
and the “Pyro” writing will flash in the display and an acoustic signal will be emitted (Fig. 20).
This means that, before activating the pyrolytic cleaning function, you have to remove the shelf supports and all the oven accessories (see instructions above mentioned).
1
2
Fig. 19
Fig. 20
22
