John Lewis JLBIOS603 When the oven is first installed, To set the correct time, Before first use

When the oven is first installed

Remove all packaging, both inside and outside the oven including the advertising labels and any protective film, before using the oven.

When the oven is first connected to the electrical supply, the

display will automatically show 12:00 and the symbol will

flash.

Ensure the correct time is set before using the oven.

To set the correct time

a) press Time functions button and, while the symbol	is
flashing (Fig. 1), set the correct time by pressing buttons “		“
or “ “ (Fig. 2).

The time arrow symbol will disappear about 5 seconds after the correct time is displayed (Fig. 3).

b)if the symbol is not flashing anymore, press Timefunctions button twice.

Then, proceed as described in point a).

Before first use

The oven should be heated without food.

To do that, proceed as follows:

—press button to switch on the oven.

—press Oven functions button twice and select the

"Conventional Cooking" function (Fig. 4).

— set the temperature to 250 °C using the increasing push button “ “.

— Allow the oven to run empty for approximately 45 minutes.

— open a window for ventilation.

This procedure should be repeated with the "Fan

Cooking"	and "Full Grill"	function for
approximately 5-10 minutes.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm water to which a little mild washing-up liquid has been added.

Before cooking for the first time, carefully wash the shelves and the baking tray.

To open the oven door, always hold the handle in the centre (Fig . 5) .

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

8