2.The Cooking Duration symbol 
will start flashing; during this time push “ “ or “
“ buttons to select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function.
3.Once you have chosen the desired pyrolytic function, the “Pyro” writing will flash in the display waiting for confirmation to start the pyrolytic cleaning function. At this time, push the Time functions button until the
"End of Cooking" symbol 
and the arrow symbol 
will flash (Fig. 24). The control panel will display
the end of the cleaning cycle (that is, the actual time + cooking duration time).
Push “ “ or “
“ buttons to select the required end of cycle time (Fig. 24).After a few seconds, the “Pyro”
writing and the symbol 
will stop flashing, the acoustic signal will stop while the Cooking Duration
symbol 
will flash until the pyrolytic cleaning cycle start.
4.After some time, the door lock will be activated and
the related symbol 
will be displayed.
At the end of the pyrolytic cleaning process, the display shows the time.The oven door is locked.
Once the oven has cooled down, an acoustic signal will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, push button 
.
1 
Fig. 24
24
