Johnson Controls J15 warranty SOUND POWER RATING1, Capacity Ratings - Ari, Gas Heat Ratiings

349687-JTG-A-1007

TABLE 1: SOUND POWER RATING1

		ESP	BLOWER					SOUND POWER (db 10-12			Watts)
UNIT
	CFM					Octave Band Centerline Frequency (Hz)							SWL	dB(A)
SIZE
														@
		IWG	RPM	BHP	63	125	250	500	1,000	2,000	4,000	8,000	dB(A)
														10Ft.2
J15DJ	6,000	1.00	1,080	4.60	99	99	89	82	84	77	72	67	89	56
J18, 20 DJ	8,000	1.00	1,120	6.65	102	102	92	85	87	80	75	70	92	59
J25DJ	10,000	1.30	1160	12.5	108	108	98	91	93	86	81	76	98	65

1.These values have been accessed using a model of sound propagation from a point source into the hemispheric\free field. The dBA values provided are to be used for reference only. Calculation of dBA values cover matters of system design and the fan manufacture has no way of knowing the details of each system. This constitutes and expectation to any specification or guaran- tee requiring a dBA value or sound data in any other form than sound power level ratings.

2.At a distance of 10 feet from the blower.

TABLE 2: CAPACITY RATINGS - (ARI 360)1

MODEL	MBH	EER2	IPLV3
COOLING ONLY
J15DJC/E00	178	12.0	12.5
J18DJC/E00	208	11.7	12.7
J20DJC/E00	230	11.3	12.0
J25DJC/E00	292	10.5	11.2
COOLING WITH GAS HEAT
J15DJN/S	178	12.0	12.5
J18DJN/S	208	11.7	12.7
J20DJN/S	230	11.3	12.0
J25DJN/S	292	10.5	11.2
COOLING WITH ELECTRIC HEAT
J15DJE18	178	12.0	12.5
J15DJE36	178	12.0	12.5
J15DJE54	176	11.8	12.2
J15DJE72	176	11.8	12.2
J18DJE18	208	11.7	12.7
J18DJE36	208	11.7	12.7
J18DJE54	206	11.5	12.4
J18DJE72	206	11.5	12.4
J20DJE18	230	11.3	12.0
J20DJE36	230	11.3	12.0
J20DJE54	228	11.1	11.7
J20DJE72	228	11.1	11.7
J25DJE18	292	10.5	11.2
J25DJE36	292	10.5	11.2
J25DJE54	290	10.3	11.0
J25DJE72	290	10.3	11.0

1.Certified in accordance with the Unitary Large Equip- ment certification program which is based on ARI Stan- dard 340/360.

2.EER = Energy Efficiency Ratio at full load - the cooling capacity in Btu’s per hour (Btuh) divided by the power input in watts, expressed in Btuh per watt (Btuh/watt).

3.IPLV = Integrated Part Load Value.

TABLE 3: GAS HEAT RATIINGS

MODEL	MBH INPUT	MBH OUTPUT
J15DJN/S24	300	240
J15DJN/S32	400	320
J18DJN/S24	300	240
J18DJN/S32	400	320
J20DJN/S24	300	240
J20DJN/S32	400	320
J25DJN/S24	300	240
J25DJN/S32	400	320

NOTE: All gas units are two-stage heating. First stage is 50% of total.

S.S.E. = Steady State Efficiency (80%) - output divided by input.

For units with VFD and electric or gas heat, the speed of the indoor blower motor continues to be controlled by duct static pressure via the VAV control board.

If there are VAV boxes present in the duct sys- tem, the boxes must be driven to the full-open position using a customer-supplied power source to assure adequate airflow across elec- tric heating elements or gas heat exchanger tubes.

Johnson Controls Unitary Products 9