The Front Panel
Console and Modem Ports
The Console port is an RJ-45 serial console port connector, for vt100 terminal emulator programs to perform local configuration and administration.
The Modem port is an RJ-45 serial console port connector, for establishing remote console sessions using dialup connections through a 9600 bps modem connected via an RS-232 cable. Dialing into the modem establishes the dialup console connection.
The table below lists the RJ-45 to DB-9 adapter connection definitions. To employ a standard UART port, both the console and the modem ports use this configuration.
DB9 | Signal | Abbreviation | DTE | DCE | RJ-45 |
| | | | | |
1 | Data Carrier Detect | DCD | In | Out | NC |
| | | | | |
2 | Received Data | RD | In | Out | 3 |
| | | | | |
3 | Transmitted Data | TD | Out | In | 6 |
| | | | | |
4 | Data Terminal Ready | DTR | Out | In | 7 |
| | | | | |
5 | Signal Ground | SGND | N/A | N/A | 4 |
| | | | | |
6 | Data Set Ready | DSR | In | Out | 2 |
| | | | | |
7 | Request To Send | RTS | Out | In | 8 |
| | | | | |
8 | Clear To Send | CTS | In | Out | 1 |
| | | | | |
9 | Ring Indicator | RI | In | Out | NC |
| | | | | |
Compact Flash Card Slot
The NetScreen-200 Series supports CompactFlash™ cards with a variety of memory capacities. NetScreen has tested SanDisk 96MB and 512MB cards. The NetScreen device automatically detects the presence of a flash card and records the system log to it.
