Quick Start Description
Quick Start Description
This Quick Start contains information you need to install and configure the router quickly. For complete installation instructions, see the M7i Internet Router Hardware Guide at http://www.juniper.net/techpubs/hardware/.
WARNING: This Quick Start contains a summary of safety warnings in “Safety Warnings” on page 15. For a complete list of warnings for this router, including translations, see the M7i Internet Router Hardware Guide at http://www.juniper.net/techpubs/hardware/.
The M7i Internet Router is a complete routing system that provides ATM, channelized, Ethernet, IP services, and SONET/SDH interfaces for large networks and network applications, such as those supported by Internet service providers (ISPs).
The router accommodates up to four Physical Interface Cards (PICs). In addition to the PICs, the Fixed Interface Card (FIC) provides two Fast Ethernet ports or one Gigabit Ethernet port, depending on your configuration. The
The router provides very high throughput for any combination of PICs that does not exceed 3.2 Gbps full duplex. A combination that exceeds this number is supported, but constitutes oversubscription.
The router is shipped in a cardboard carton, secured with foam packing material. The carton contains:
■One accessory box (the box to which this Quick Start is taped)
■One Juniper Networks router
■One Quick Start (this document)
Step 1: Prepare the Site
Before installing the router, read the site preparation guidelines in the M7i Internet Router Hardware Guide to make sure that the site meets power, environmental, and clearance requirements for the router.
Rack-Mounting Requirements
■You can install the router in a
■The rack must be strong enough to support the weight of the fully configured router, up to about 36.5 lb (16.6 kg). You can mount up to 21 M7i routers in a
Quick Start Description | ■ | 3 |
