4 Permanent settings in programming mode
Product | Coffee strength | Amount | More settings |
|
|
|
|
Two cappuccini, | – | Water: 0.5 oz – 8.0 oz | Temperature (low, |
two caffè latte, |
| (25 ml – 240 ml) | normal, high), |
two espressi |
| Milk: 0 sec. – 120 sec. | grinder on the left and/or |
macchiati, |
| Milk foam: | right (as %) |
two latte macchiati |
| 0 sec. – 120 sec. |
|
|
| (per cup) |
|
|
|
|
|
Portion of milk | – | Milk: 0 sec. – 120 sec. | – |
foam, |
| Milk foam: |
|
portion of milk |
| 0 sec. – 120 sec. |
|
|
|
|
|
Two portions of milk | – | Milk: 0 sec. – 120 sec. | – |
foam, |
| Milk foam: |
|
two portions of milk |
| 0 sec. – 120 sec. |
|
|
| (per cup) |
|
|
|
|
|
Hot water | – | Water: 0.5 oz – 15.0 oz | Temperature (low, |
|
| (25 ml – 450 ml) | normal, high) |
|
|
|
|
EIn addition to the settings listed, you can reset the values for all products to the factory settings.
Example: Proceed as follows in the ‘Expert mode’ to change the amount of milk for a latte macchiato from ‘4 sec.’ to ‘6 sec.’, the amount of milk foam from ‘12 sec.’ to ‘14 sec.’ and the amount of water from ‘1.5 oz’ (45 ml) to ‘1.0 oz’ (40 ml).
Precondition: ‘Please select product:’ is displayed.
OT Press the P button.
‘Maintenance status (1/5)’
gT Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’ is displayed.
TPress the ‘Expert mode’ button. ‘Expert mode’
ENext select the button of the product for which you would like to make settings. No product is prepared at this point.
EYou can also select the products in the product selector. To do this, turn the Rotary Switch to view the product selector.
T Press the ‘Latte macchiato’ button. T Press the ‘Amount of milk’ button.
28
