Jura Capresso 13623 manual TPress the ‘Amount of milk foam’ button, TPress the ‘Save’ button

4 Permanent settings in programming mode

TPress the ‘+’ or ‘–’button to change setting for the amount of milk to ‘6 sec.’.

TPress the ‘Save’ button.

TPress the ‘Amount of milk foam’ button.

TPress the ‘+’ or ‘–’button to change setting for the amount of milk foam to ‘14 sec.’.

TPress the ‘Save’ button.

TPress the ‘Volume’ button.

TPress the ‘+’ or ‘–’button to change setting for the fill vol- ume to ‘1.0 oz’ (40 ml).

TPress the ‘Save’ button.

OT Press the P button to exit programming mode. ‘Please select product:’

Setting the consistency In the program item ‘Product settings (2/5)’ / ‘Set consistency of

of grindgrind’ you can adjust both grinders separately to the degree of roast of your coffee.

The consistency of grind setting is correct if the coffee flows regu- larly from the dual spout. In addition a fine, thick crema forms.

Example: Proceed as follows to change the consistency of grind for the grinder on the right.

Precondition: ‘Please select product:’ is displayed.

OT Press the P button.

‘Maintenance status (1/5)’

gT Turn the Rotary Switch until the program item ‘Product set- tings (2/5)’ is displayed.

TPress the ‘Set consistency of grind’ button. ‘Set consistency of grind’

TPress the ‘Right grinder’ button. ‘Right grinder’

TPress the ‘+’ or ‘–’button to change the setting for the con- sistency of grind.

TPress the ‘Save’ button.

‘Saved’ appears briefly on the display. ‘Set consistency of grind’

OT Press the P button to exit programming mode. ‘Please select product:’

29