To install a print cartridge, Storing print cartridges | HP 3300mfp

1

2

3

4

5

To install a print cartridge

To install a print cartridge, use the following steps:

CAUTION

To prevent damage to the print cartridge, do not expose it to light for more than a few minutes.

1Open the print cartridge door.

2Remove the print cartridge from its packaging, and locate the sealing tape at the end of the cartridge.

3To remove the sealing tape from the cartridge, grasp the tape and pull it straight out from the cartridge. Avoid touching any black print on the tape.

4Insert the cartridge as shown, with the arrows pointing into the product.

5Close the print cartridge door. The print cartridge engages when the door is closed.

Note

If toner gets on your clothing or other fabric, wipe off the toner with a dry cloth. Wash the items in cold water and air dry.

CAUTION

Hot water or heat from a dryer can set toner into fabric.

Storing print cartridges

Do not remove the print cartridge from its package until you are ready to use it. The shelf life of a print cartridge in an unopened package is approximately 2.5 years. The shelf life of a print cartridge in an opened package is approximately 6 months.

CAUTION

To prevent damage to the print cartridge, do not expose it to light.

EN	HP LaserJet print cartridges 147

Image 149

HP 3300mfp manual To install a print cartridge, Storing print cartridges

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product HP LaserJet 3300mfp Identifying your product HP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp HP LaserJet 3300 series hardware components Identifying your product’s hardware components Fax controls Identifying your product’s control panel components Alphanumeric buttons Menu and cancel controls Copy, scan, and start controls Identifying HP Jetdirect 310x print server components Identifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Sealing tape at the end of the cartridge Installing a print cartridge Installing and loading the media input trays Connecting the power cord Installing the ADF input tray To load originals onto the flatbed scanner Loading originals to copy or scan To load originals into the ADF input tray To self-test the printer To self-test the copier using the ADF input trayVerifying your work To print a control panel menu map To self-test the copier using the flatbed scanner Changing your product’s general default settings Printing a configuration HP LaserJet 3300 series product settingsRestoring the factory default settings Printing a control panel menu map Changing the display panel language Changing the default paper sizeUsing the product’s volume controls To change the volume for the fax product Changing settings from your computerTo change the ring volume of the fax product To change the control panel key press volume To change default settings across all applications Macintosh To change default settings across all applications Windows 40 3 Changing your product’s general default settings Printing Understanding print quality settings Stopping or canceling a print jobTo print using manual feed Printing with manual feed To change print quality settings for all future jobs To temporarily change print quality settingsTo enable EconoMode save toner Choose Device Configuration Optimizing print quality for media types To access the optimizing feature To print one envelope Printing envelopes To print multiple envelopes To print transparencies or labels Printing transparencies and labels To print letterhead or preprinted forms Printing letterhead or preprinted forms To print custom-sized media or card stock Printing custom-sized media or card stockPrinting on both sides of the media manual duplexing To duplex manually on lightweight media Page To print multiple pages on a single sheet Macintosh Printing multiple pages on a single sheet of mediaTo print multiple pages on a single sheet Windows To print booklets Printing booklets Printing watermarks To access the watermark feature Copying Adjusting copy quality for the current job Canceling a copy jobTo adjust the copy quality for the current job Starting a copy job Adjusting the default lighter/darker contrast setting Adjusting the default copy qualityTo adjust the copy quality To adjust the lighter/darker setting for the current job Reducing or enlarging copies for the current job Adjusting the default copy sizeTo reduce or enlarge copies for the current job Original 100% Legal to Letter 78% Legal to A4 83% To change the default copy size Changing the copy collation settingTo change the copy collation setting for the current job To change the default copy collation setting To change the default number of copies Using HP LaserJet Copier softwareTo access HP LaserJet Copier Windows or Macintosh Changing the number of copies To access HP LaserJet Copy Plus Windows Using HP LaserJet Copy Plus softwareTo access HP LaserJet Copy Plus Macintosh Click Copy and select, I want to copy to another printer To copy a multiple page stack of 2-sided originals Copying photos, two-sided originals, or booksTo copy or scan a photo To copy a book 64 5 Copying Scanning Scanning from the product’s control panel Understanding scanning methods To use the scan to button via network connection To use the scan to button via USB or parallel connectionTo reprogram the scan to button destinations Press start scan or menu/enter To scan using HP LaserJet Director Windows Canceling a scan jobScanning with the product software To reprogram the start scan button To use page-by-page scanning Windows To scan using HP LaserJet Director Macintosh To use flatbed scanner preview scan Scanning with TWAIN-compliant softwareTo use page-by-page scanning Macintosh To archive a scanned image To use the archive feature MacintoshArchiving scanned text or images Scanning with OCR To use HP LaserJet Director’s OCR featureTo edit scanned text Windows and Macintosh To change the OCR word processing applicationPage Adding annotations to HP documents To access image enhancement features Windows Adding annotations to scanned image files To change the annotation settingsSending scanned items as e-mail attachments To scan to e-mail Windows To scan to e-mail Macintosh Scanner resolution and colorTo e-mail scanned files in an alternative mode Resolution and color guidelines Color Setting Recommended use Where to set the color value Faxing Setting the answer mode Setting the information in the fax headerTo set the answer mode To set the fax header Sending faxes Loading originals to faxTo load fax documents into the ADF input tray To send a fax to one recipient To send a fax to an ad hoc group To send a fax using a group-dial codeTo send a fax to multiple recipients Using manual dial Canceling a fax jobTo cancel the current fax job To cancel a fax job using fax job status Redialing manually Deleting faxes from memorySending a fax at a future time To delete faxes from memory Receiving faxes To receive faxes when you hear fax tonesTo send a fax at a future time To reprint a fax To block or unblock fax numbers Receiving faxes to your computer To program speed-dial codes and one-touch keys To turn the receive to PC setting off from the control panel To quickly program speed-dial codes or one-touch keys To delete speed-dial codes and one-touch keys To program group-dial codes Managing group-dial codesTo program a one-touch key for alternate long distance To delete an individual from a group-dial code To delete group-dial codes Deleting all phone book entries Using dialing charactersTo delete all phone book entries Dialing character table To set the dial prefix Inserting a dial prefixTo insert a pause or wait Enabling an extension phone Using fax forwardingUsing fax polling To change the fax sounds line monitor volume Changing the HP LaserJet 3330 product’s volume settingsTo change the ring volume Sending a fax by dialing from a telephone Changing the detect dial tone setting Changing the default resolutionChanging the default contrast Changing rings-to-answer To set the answer mode to automatic or manualChanging how the product answers incoming faxes Changing answer ring patterns Changing the silence-detect mode To change the silence detect mode Changing autoreduction settings for incoming faxesTo enable stamp received faxes Enabling stamp received faxes Selecting tone- or pulse-dialing mode Setting the fax error correctionChanging redial settings To change the error correction setting Changing the V.34 setting Using billing codes To print the fax activity log Managing fax logs and reportsPrinting the fax activity log Setting fax call report print times Setting the fax activity log to print automaticallyPrinting a fax call report To set the fax activity log to print automatically Printing a phone book report Including the first page of each fax on the fax call reportPrinting the billing codes report To set fax call report print times Printing the block fax list Printing a T.30 protocol trace report To print all fax reports Printing all fax reports 106 7 Faxing Networking Using network protocols Understanding the print server’s features and benefitsSoftware installation Printing protocols Network connection requirements Model Product Connectors Firmware Supported protocol Version 110 8 Networking To connect the product to a network Installing the 310x print serverPage Using the embedded web server Installing the network softwarePrerequisites Compatible web browsers To start the embedded web server Using HP Web JetAdminUsing Bootp Bootptab file entries Setting up the Bootp serverNetWare Bootp servers Windows 2000 or NT servers Tag RFC Description Option Server sends syslog messages Windows NT Procedure Using DhcpUnix servers Windows NT 4.0 servers Windows 2000 servers Windows 2000 Procedure Returning to factory defaults Configuring the print server for Dhcp configurationChanging the BOOTP/DHCP configuration method To print a Jetdirect configuration Printing a print server configurationMoving to another network For more information Cleaning and maintenance To clean the exterior Cleaning the outside of the productTo clean the glass To clean the lid backing To clean the print cartridge area Cleaning the print cartridge area Cleaning the pickup roller Cleaning the printer media pathTo clean the printer media path To clean the pickup roller To change the pickup roller Changing the pickup rollerPage To change the printer separation pad Changing the printer separation padPage To install a new or replacement ADF Installing a new ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Guidelines for using media Product media specificationsSupported media sizes printer Paper Symptom Problem with paper Solution Common media problems tableLabels Transparencies Card stock and heavy media Envelopes Selecting media for the ADF ADF specificationsCard stock construction Card stock guidelines 142 10 Media HP parts and accessories Description or use Ordering HP parts and accessoriesHP parts and accessories chart Countries/Regions Part number Input rating Output rating Power modules network model onlyDescription or use Part number Country/Regions Part number Input rating Output rating HP LaserJet print cartridgesHP policy on non-HP print cartridges Storing print cartridges To install a print cartridge DIMMs memory or font To test a Dimm installation or removalPrint cartridge life expectancy Recycling print cartridges To install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Pages print but are totally blank Product will not turn on or print Pages did not print Pages printed, but there was a problemOnscreen error messages Printed page is different from what appeared onscreen Paper handling problems Is graphics quality poor? Are graphics or text missing? Are there blank pages?Is the page format different than on another printer? To clear a media jam Clearing media jams Tips to avoid media jams To clear other media jams Toner specks Improving print qualityLight print or fade Gray background Vertical lines Vertical repetitive defects Toner smearLoose toner Skew Misformed characters Wrinkles or creases Curl or wave Critical error messages Control panel error messagesToner scatter outline Door Open or No Print Cartridge Alert messages Troubleshooting copy problems No copy came out Preventing problemsCopies are blank, or images are missing or faded Improving copy quality Typical ADF jam locations Clearing ADF media jamsTo clear a media jam from the ADF Removing a jammed ADF Vertical white or faded stripes Identifying and correcting copy defects Too light or dark Blank pagesUnwanted lines Black dots or streaks Reduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Part of the image did not scan or text is missing Scanned image is of poor quality Text cannot be edited Scan takes too long Error messages appear on the screen Improving scan quality Scanner did nothing Identifying and correcting scan defects Troubleshooting faxing problems Are you using the phone cord supplied with the product? Fax phone problemsWhat type of phone line are you using? Is the phone wall jack working properly? Is the document too large or too small for the ADF? Document stops feeding during faxing Faxes you send are not arriving Product is receiving faxes but not sending themOutgoing fax calls keep dialing Incoming fax calls are not being answered All of the numbers in a long fax number cannot be dialedUnable to start receiving faxes from an extension phone Are there too many devices connected to the phone line? Is the answer ring pattern feature turned on?Is the phone line working? Is the product out of paper? Faxes are not printing or are printing incorrectly Faxes are transmitting or being received very slowlyFaxes are printing on two pages instead of one Received faxes are too light or are printing only on half Do the volume settings need to be adjusted? Volume is too high or lowAre the activity log and call report settings correct? Troubleshooting network problems On and Ready Troubleshooting overviewIs your printer on and READY? USB OK? USB light on solid green? Is the USB light on solid green? What is the state of the USB light?USB light OFF Is the USB light now on solid green? USB light blinking amber Power/Status OK? Power/Status light on solid green?Is the Power/Status light on solid green? 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Error messages Configuration page does not print LAN Error Infinite Deferral LAN Error External LoopbackLAN Error Retry Faults LAN Error no Linkbeat Interpreting the configuration Message Description General information MessageDescription USB port informationNetwork statistics TCP/IP protocol information Total number of frames packets transmitted without error Value 202 16 Troubleshooting network problems Associated with each network number IPX/SPX protocol information Novell/NetWare protocol information DLC/LLC protocol information AppleTalk protocol information Error Code and Message Description Error messages Beat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Term Definition Glossary Glossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information Environmental specifications HP LaserJet 3300 series product specificationsElectrical specifications HP LaserJet 3300 series product Copier capacities and ratings Physical specificationsPrinter capacities and ratings ADF specifications Laser safety statementMemory specifications Scanner capacities and ratings FCC regulations According to ISO/IEC Guide 22 and EN Declaration of Conformity Laser statement for Finland Canada DOC regulations Korean EMI statement Japan Vcci Class B regulations HP LaserJet 3330 product fax specificationsHP LaserJet 3330 fax Telephone consumer protection act US FCC Part 68 Requirements US HP Jetdirect 310x print server Supported networks HP Jetdirect 310x print server specifications Electromagnetic emissions SafetyElectromagnetic immunity FCC compliance According to ISO/IEC Guide 22 and EN45014 Japan Vcci Class 1 regulations Korean EMI statement AustraliaCanada Chinese safety statement Environmental product stewardship program Material restrictions Material safety data sheetsUS returns Non-US returns Paper Extended warranty HP LaserJet 3300 series product batterySpare parts and consumables availability For more information Appendix a Specifications and regulatory information HP software license agreement Appendix B Warranties and licensing HP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing Obtaining hardware service Appendix C Service and supportTo obtain hardware service Returning the unit Service information form Extended warrantyService information form Service information form Appendix C Service and support ADF Index Index See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company