Moving to another network, For more information | HP 3300mfp

Moving to another network

When you move an HP Jetdirect print server that is configured with an IP address to a new network, make sure that the IP address does not conflict with the IP addresses on the new network. You can change the print server’s IP address to one that can be used on the new network, or you can erase the current IP address and configure another IP address after you install the print server on the new network. Cold reset the print server (see Resetting the 310x print server to factory defaults (cold reset) for instructions).

If the current BOOTP server cannot be reached, you might need to find a different BOOTP server and configure the printer to that server.

If you used BOOTP or DHCP to configure the print server, edit the appropriate system files with updated settings. If you manually set the IP address, reconfigure the IP parameters.

Follow the instructions on the appropriate home page to configure or modify your printer. These instructions show you how to configure your printer and set up the printer for printing.

Note	You can substitute the server domain with the TCP/IP address.

Printing a print server configuration page

If you connect your HP LaserJet 3300 series product to a network, use the following instructions to print out a configuration page with information about your print server.

To print a Jetdirect configuration page

Briefly press the test button on the rear panel of the print server. If you are not sure if the configuration page is in the process of printing, check the power/status LED. If the page never appears on the printer (or if it is unreadable), see Configuration page does not print.

For more information on the configuration page, see Interpreting the configuration page.

For more information

For more information on the print server, see the HP support web site for the HP LaserJet 3300 series: http://www.hp.com/support/lj3300 (site is in English).

122 8 Networking

EN

Image 124

HP 3300mfp manual Moving to another network, Printing a print server configuration, For more information

Contents

Use Page User guide Copyright Information Contents Printing Scanning Page Networking Cleaning and maintenance Troubleshooting printing problems Troubleshooting scanning problems Troubleshooting network problems Appendix B Warranties and licensing Getting to know your product Identifying your product HP LaserJet 3300mfp HP LaserJet 3300se mfp HP LaserJet 3310mfp HP LaserJet 3320mfp HP LaserJet 3320n mfp HP LaserJet 3330mfp Identifying your product’s hardware components HP LaserJet 3300 series hardware components Identifying your product’s control panel components Fax controls Menu and cancel controls Alphanumeric buttons Identifying HP Jetdirect 310x print server components Copy, scan, and start controls Identifying your product’s software components Getting started Finding a location for your product Connecting a printer cable to your product Installing a print cartridge Sealing tape at the end of the cartridge Installing and loading the media input trays Installing the ADF input tray Connecting the power cord Loading originals to copy or scan To load originals onto the flatbed scanner To load originals into the ADF input tray Verifying your work To self-test the copier using the ADF input trayTo self-test the printer To self-test the copier using the flatbed scanner To print a control panel menu map Changing your product’s general default settings HP LaserJet 3300 series product settings Printing a configurationRestoring the factory default settings Printing a control panel menu map Using the product’s volume controls Changing the default paper sizeChanging the display panel language Changing settings from your computer To change the volume for the fax productTo change the ring volume of the fax product To change the control panel key press volume To change default settings across all applications Windows To change default settings across all applications Macintosh 40 3 Changing your product’s general default settings Printing Stopping or canceling a print job Understanding print quality settingsTo print using manual feed Printing with manual feed To temporarily change print quality settings To change print quality settings for all future jobsTo enable EconoMode save toner Choose Device Configuration To access the optimizing feature Optimizing print quality for media types Printing envelopes To print one envelope To print multiple envelopes Printing transparencies and labels To print transparencies or labels Printing letterhead or preprinted forms To print letterhead or preprinted forms Printing on both sides of the media manual duplexing Printing custom-sized media or card stockTo print custom-sized media or card stock To duplex manually on lightweight media Page To print multiple pages on a single sheet Windows Printing multiple pages on a single sheet of mediaTo print multiple pages on a single sheet Macintosh Printing booklets To print booklets To access the watermark feature Printing watermarks Copying Canceling a copy job Adjusting copy quality for the current jobTo adjust the copy quality for the current job Starting a copy job Adjusting the default copy quality Adjusting the default lighter/darker contrast settingTo adjust the copy quality To adjust the lighter/darker setting for the current job Adjusting the default copy size Reducing or enlarging copies for the current jobTo reduce or enlarge copies for the current job Original 100% Legal to Letter 78% Legal to A4 83% Changing the copy collation setting To change the default copy sizeTo change the copy collation setting for the current job To change the default copy collation setting Using HP LaserJet Copier software To change the default number of copiesTo access HP LaserJet Copier Windows or Macintosh Changing the number of copies Using HP LaserJet Copy Plus software To access HP LaserJet Copy Plus WindowsTo access HP LaserJet Copy Plus Macintosh Click Copy and select, I want to copy to another printer To copy or scan a photo Copying photos, two-sided originals, or booksTo copy a multiple page stack of 2-sided originals To copy a book 64 5 Copying Scanning Understanding scanning methods Scanning from the product’s control panel To use the scan to button via USB or parallel connection To use the scan to button via network connectionTo reprogram the scan to button destinations Press start scan or menu/enter Canceling a scan job To scan using HP LaserJet Director WindowsScanning with the product software To reprogram the start scan button To scan using HP LaserJet Director Macintosh To use page-by-page scanning Windows To use page-by-page scanning Macintosh Scanning with TWAIN-compliant softwareTo use flatbed scanner preview scan Archiving scanned text or images To use the archive feature MacintoshTo archive a scanned image To use HP LaserJet Director’s OCR feature Scanning with OCRTo edit scanned text Windows and Macintosh To change the OCR word processing applicationPage To access image enhancement features Windows Adding annotations to HP documents To change the annotation settings Adding annotations to scanned image filesSending scanned items as e-mail attachments To scan to e-mail Windows To e-mail scanned files in an alternative mode Scanner resolution and colorTo scan to e-mail Macintosh Resolution and color guidelines Setting Recommended use Where to set the color value Color Faxing Setting the information in the fax header Setting the answer modeTo set the answer mode To set the fax header Loading originals to fax Sending faxesTo load fax documents into the ADF input tray To send a fax to one recipient To send a fax to multiple recipients To send a fax using a group-dial codeTo send a fax to an ad hoc group Canceling a fax job Using manual dialTo cancel the current fax job To cancel a fax job using fax job status Deleting faxes from memory Redialing manuallySending a fax at a future time To delete faxes from memory To receive faxes when you hear fax tones Receiving faxesTo send a fax at a future time To reprint a fax Receiving faxes to your computer To block or unblock fax numbers To turn the receive to PC setting off from the control panel To program speed-dial codes and one-touch keys To delete speed-dial codes and one-touch keys To quickly program speed-dial codes or one-touch keys To program a one-touch key for alternate long distance Managing group-dial codesTo program group-dial codes To delete group-dial codes To delete an individual from a group-dial code Using dialing characters Deleting all phone book entriesTo delete all phone book entries Dialing character table To insert a pause or wait Inserting a dial prefixTo set the dial prefix Using fax polling Using fax forwardingEnabling an extension phone Changing the HP LaserJet 3330 product’s volume settings To change the fax sounds line monitor volumeTo change the ring volume Sending a fax by dialing from a telephone Changing the default contrast Changing the default resolutionChanging the detect dial tone setting Changing how the product answers incoming faxes To set the answer mode to automatic or manualChanging rings-to-answer Changing the silence-detect mode Changing answer ring patterns Changing autoreduction settings for incoming faxes To change the silence detect modeTo enable stamp received faxes Enabling stamp received faxes Setting the fax error correction Selecting tone- or pulse-dialing modeChanging redial settings To change the error correction setting Using billing codes Changing the V.34 setting Printing the fax activity log Managing fax logs and reportsTo print the fax activity log Setting the fax activity log to print automatically Setting fax call report print timesPrinting a fax call report To set the fax activity log to print automatically Including the first page of each fax on the fax call report Printing a phone book reportPrinting the billing codes report To set fax call report print times Printing a T.30 protocol trace report Printing the block fax list Printing all fax reports To print all fax reports 106 7 Faxing Networking Understanding the print server’s features and benefits Using network protocolsSoftware installation Printing protocols Model Product Connectors Firmware Supported protocol Version Network connection requirements 110 8 Networking Installing the 310x print server To connect the product to a networkPage Installing the network software Using the embedded web serverPrerequisites Compatible web browsers Using Bootp Using HP Web JetAdminTo start the embedded web server Setting up the Bootp server Bootptab file entriesNetWare Bootp servers Windows 2000 or NT servers Tag RFC Description Option Server sends syslog messages Using Dhcp Windows NT ProcedureUnix servers Windows NT 4.0 servers Windows 2000 servers Windows 2000 Procedure Changing the BOOTP/DHCP configuration method Configuring the print server for Dhcp configurationReturning to factory defaults Printing a print server configuration To print a Jetdirect configurationMoving to another network For more information Cleaning and maintenance Cleaning the outside of the product To clean the exteriorTo clean the glass To clean the lid backing Cleaning the print cartridge area To clean the print cartridge area Cleaning the printer media path Cleaning the pickup rollerTo clean the printer media path To clean the pickup roller Changing the pickup roller To change the pickup rollerPage Changing the printer separation pad To change the printer separation padPage Installing a new ADF To install a new or replacement ADFPage Changing an ADF pickup roller assembly Page Removing and replacing the control panel bezel 136 9 Cleaning and maintenance Media Product media specifications Guidelines for using mediaSupported media sizes printer Paper Common media problems table Symptom Problem with paper SolutionLabels Transparencies Envelopes Card stock and heavy media ADF specifications Selecting media for the ADFCard stock construction Card stock guidelines 142 10 Media HP parts and accessories HP parts and accessories chart Ordering HP parts and accessoriesDescription or use Description or use Part number Power modules network model onlyCountries/Regions Part number Input rating Output rating HP policy on non-HP print cartridges HP LaserJet print cartridgesCountry/Regions Part number Input rating Output rating To install a print cartridge Storing print cartridges To test a Dimm installation or removal DIMMs memory or fontPrint cartridge life expectancy Recycling print cartridges To install a Dimm Page To remove a Dimm 152 11 HP parts and accessories Troubleshooting printing problems Product will not turn on or print Pages print but are totally blank Onscreen error messages Pages printed, but there was a problemPages did not print Paper handling problems Printed page is different from what appeared onscreen Is the page format different than on another printer? Are graphics or text missing? Are there blank pages?Is graphics quality poor? Clearing media jams To clear a media jam To clear other media jams Tips to avoid media jams Light print or fade Improving print qualityToner specks Vertical lines Gray background Loose toner Toner smearVertical repetitive defects Misformed characters Skew Curl or wave Wrinkles or creases Control panel error messages Critical error messagesToner scatter outline Door Open or No Print Cartridge Alert messages Troubleshooting copy problems Preventing problems No copy came outCopies are blank, or images are missing or faded Improving copy quality To clear a media jam from the ADF Clearing ADF media jamsTypical ADF jam locations Removing a jammed ADF Identifying and correcting copy defects Vertical white or faded stripes Blank pages Too light or darkUnwanted lines Black dots or streaks Reduced size 174 13 Troubleshooting copy problems Troubleshooting scanning problems Scanned image is of poor quality Part of the image did not scan or text is missing Text cannot be edited Error messages appear on the screen Scan takes too long Scanner did nothing Improving scan quality Identifying and correcting scan defects Troubleshooting faxing problems Fax phone problems Are you using the phone cord supplied with the product?What type of phone line are you using? Is the phone wall jack working properly? Document stops feeding during faxing Is the document too large or too small for the ADF? Outgoing fax calls keep dialing Product is receiving faxes but not sending themFaxes you send are not arriving Unable to start receiving faxes from an extension phone All of the numbers in a long fax number cannot be dialedIncoming fax calls are not being answered Is the answer ring pattern feature turned on? Are there too many devices connected to the phone line?Is the phone line working? Is the product out of paper? Faxes are transmitting or being received very slowly Faxes are not printing or are printing incorrectlyFaxes are printing on two pages instead of one Received faxes are too light or are printing only on half Are the activity log and call report settings correct? Volume is too high or lowDo the volume settings need to be adjusted? Troubleshooting network problems Troubleshooting overview On and ReadyIs your printer on and READY? USB OK? USB light on solid green? What is the state of the USB light? Is the USB light on solid green?USB light OFF Is the USB light now on solid green? Is the Power/Status light on solid green? Power/Status OK? Power/Status light on solid green?USB light blinking amber 10/100 link OK? 10 light or 100 light on solid green? Check the print server’s I/O status Configuration page does not print Error messages LAN Error External Loopback LAN Error Infinite DeferralLAN Error Retry Faults LAN Error no Linkbeat Interpreting the configuration General information Message Description Network statistics USB port informationMessageDescription Total number of frames packets transmitted without error TCP/IP protocol information Value 202 16 Troubleshooting network problems IPX/SPX protocol information Associated with each network number Novell/NetWare protocol information AppleTalk protocol information DLC/LLC protocol information Error messages Error Code and Message Description Beat 208 16 Troubleshooting network problems Added to the list of queue servers 210 16 Troubleshooting network problems On the spooling server 212 16 Troubleshooting network problems Was not the BOOTP/DHCP server port 67/udp Browse hp.com Glossary Term Definition Glossary 217 File format 219 PPD 221 Glossary Appendix a Specifications and regulatory information HP LaserJet 3300 series product specifications Environmental specificationsElectrical specifications HP LaserJet 3300 series product Printer capacities and ratings Physical specificationsCopier capacities and ratings Laser safety statement ADF specificationsMemory specifications Scanner capacities and ratings FCC regulations Declaration of Conformity According to ISO/IEC Guide 22 and EN Canada DOC regulations Laser statement for Finland HP LaserJet 3330 fax HP LaserJet 3330 product fax specificationsKorean EMI statement Japan Vcci Class B regulations FCC Part 68 Requirements US Telephone consumer protection act US HP Jetdirect 310x print server HP Jetdirect 310x print server specifications Supported networks Electromagnetic immunity SafetyElectromagnetic emissions FCC compliance According to ISO/IEC Guide 22 and EN45014 Canada AustraliaJapan Vcci Class 1 regulations Korean EMI statement Chinese safety statement Environmental product stewardship program US returns Non-US returns Paper Material safety data sheetsMaterial restrictions HP LaserJet 3300 series product battery Extended warrantySpare parts and consumables availability For more information Appendix a Specifications and regulatory information Appendix B Warranties and licensing HP software license agreement HP limited warranty statement HP limited warranty statement Appendix B Warranties and licensing Appendix C Service and support Obtaining hardware serviceTo obtain hardware service Returning the unit Service information form Extended warrantyService information form Service information form Appendix C Service and support Index ADF Index See also media Index Loose 162 smear 162 specks 160 transparencies printing Page Copyright Hewlett-Packard Company