To print the billing codes report
1Press menu/enter.
2Use the < or > button to select Reports and press menu/enter.
3Use the < or > button to select Billing Report and press menu/enter. The product exits the Menu settings and prints the report.
Printing a T.30 protocol trace report
This report is used by service technicians to troubleshoot fax transmission issues.
To print a T.30 protocol trace report
1Press enter/menu.
2Use the < or > button to select Service and press enter/menu.
3Use the < or > button to select Print T.30 Trace and press enter/menu.
4Use the < or > button to select Now and press enter/menu. The product exits the Menu settings and prints the report.
To set T.30 protocol trace report print times
You can set the T.30 protocol trace report to print at the following times:
●Never (the default)
●When an error occurs
●At the end of every sent and received fax
Use the following steps to set the T.30 protocol trace report print times:
1Press enter/menu.
2Use the < or > button to select Service and press enter/menu.
3Use the < or > button to select Print T.30 Trace and press enter/menu.
4Use the < or > button to select when T.30 protocol trace reports will print.
5Press enter/menu to save the selection.
Printing the block fax list
Use this procedure to print a list of the blocked fax numbers. See To block or unblock fax numbers.
To print the block fax list
1Press menu/enter.
2Use the < or > button to select Reports and press menu/enter.
3Use the < or > button to select Block Fax List and press menu/enter. The product exits the Menu settings and prints the list.
104 7 Faxing | EN |
