8If you have set Lease Duration to Unlimited in the previous step, skip to the next step. If you have set Lease Duration to a finite time, continue with this step:
Select Scope and select Add Reservations to set up your print servers as reserved clients. For each print server, perform the following steps in the Add Reserved Clients window to set up a reservation for that print server:
a Type the selected IP address.
b Obtain the hardware (MAC) address from the configuration page, and type this address in the Unique Identifier box.
c Input a client name.
d Select Add to add the reserved client. To delete a reservation, in the DHCP Manager window, select Scope and select Active Leases. In the Active Leases window, click on the reservation you want to delete and select Delete.
9Select Close to return to the DHCP Manager window.
10If you do not plan to use WINS (Windows Internet Naming Service), skip to the next step. If you plan to use WINS (Windows Internet Naming Service), continue with this step:
a From the DHCP Manager window, select DHCP Options and select one of the following: Scope: if you want name services only for the selected scope.
Global: if you want name services for all scopes.
b Add the server to the Active Options list. In the DHCP Options window, select WINS/NBNS Servers (044) from the Unused Options list. Select Add; then select OK.
A warning may appear requesting that you set the node type. You will do this in step 10d below.
cNow provide the IP address of the WINS server as follows:
i.Select Value, then Edit Array.
ii.From the IP Address Array Editor, select Remove to delete any undesired addresses previously set. Then type in the IP address of the WINS server and select Add.
iii.Once the address appears in the list of IP addresses, select OK. This returns you to the DHCP Options window. If the address you have just added appears in the list of IP addresses (near the bottom of the window) continue to step 10d below. Otherwise, retry step 10c.
dIn the DHCP Options window, select WINS/NBT Node Type (046) from the Unused Options list. Select Add to add the node type to the Active Options list. In the Byte box, input 0x4 to indicate a mixed node, and select OK.
11Click Close to exit to the Program Manager.
| Windows 2000 servers: |
| You will set up a pool of IP addresses that the server can assign or lease to a requester. |
|
|
Note | To avoid problems resulting from IP addresses that change, HP recommends that all print servers |
| be assigned IP addresses with infinite leases or reserved IP addresses. |
|
|
EN | Using DHCP 119 |
