Verifying your work
After setting up the product, verify your work by testing your HP LaserJet 3300 product’s printing and copying functions.
To self-test the printer
To test the printer, use the following steps:
1On the product’s control panel, press menu/enter.
2Use the < and > buttons to select Reports and press menu/enter.
3Use the < and > buttons to select Config Report and press menu/enter.
A configuration page prints, showing the product’s current configuration and the control panel display returns to Ready. If the page does not print successfully, see Troubleshooting printing problems.
To self-test the copier using the ADF input tray
Use the configuration page you just printed to test the copier.
1Adjust the guides on the ADF input tray to the size of the configuration page.
2Place the configuration page into the ADF input tray top first, print side up. Verify that the control panel display reads Document Loaded.
3On the product’s control panel, press start/copy.
The product makes a copy of the configuration page and the control panel display returns to Ready. If the page does not copy successfully, see Troubleshooting copy problems.
1
2 |
EN | Verifying your work 33 |