Error Code and Message | Description |
|
|
12 | With a |
LAN ERROR- NO LINKBEAT | network cable, and verify that the concentrator or hub is providing Link |
| Beat. |
|
|
13 | Reset or power cycle the print server to enable the new configuration |
NETWORK RECONFIG- MUST | values. |
REBOOT |
|
|
|
15 | The configuration information for the NetWare functions is not stored |
CONFIGURATION ERROR | correctly on the print server. Use the installation software, embedded web |
| server, or other tools to reconfigure the print server. If this error persists, |
| there may be a problem with the print server. |
|
|
16 | The print server has not been configured for NetWare. Use the installation |
NOT CONFIGURED | software, embedded web server, or other tools to configure the print server |
| for NetWare networks. |
|
|
17 | The print server was unable to find the NetWare print server (in Remote |
UNABLE TO FIND SERVER | Printer mode) or file server (in Queue Server mode). There was no |
| response to service queries for advertising print servers or file servers that |
| matched the configured print server or file server name. |
| Make sure that the print server or file server is running and that the print |
| server or file server name configured on the print server matches the actual |
| name used by the print server or file server. Also make sure that all cables |
| and routers are functioning correctly. |
|
|
18 | The print server detected that the password for the NetWare print server |
PASSWORD ERROR | object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the |
| password for the print server object. When the print server logs on again, it |
| sets a new password. |
| Note: When multiple file servers are configured, the error is only displayed |
| on the configuration page if none of the file servers are connected. |
|
|
19 | The HP Jetdirect print server detected that the print server object has not |
NO QUEUE ASSIGNED | been assigned any queues to service. Assign queues to the print server |
| object using printer installation or NetWare utilities. |
| Note: When multiple file servers are configured, the error is only displayed |
| on the configuration page if none of the file servers was successfully |
| connected. |
|
|
1A | A NetWare printer number for this printer has not been configured. Assign a |
PRINTER NUMBER NOT | valid printer number to the print server. Use a NetWare utility (such as |
DEFINED | PCONSOLE), the Jetdirect embedded web server, or another tool to assign |
| a printer number. |
|
|
1B | The NetWare printer number assigned to the printer is already in use by |
PRINTER NUMBER IN USE | another printer. Assign an unused printer number. This may also occur |
| when a printer is power cycled, in which case the error goes away after the |
| print server times out and detects the lost connection. |
EN | Interpreting the configuration page 207 |
