HP 3300mfp manual Declaration of Conformity, According to ISO/IEC Guide 22 and EN

Declaration of Conformity

The following Declaration of Conformity complies with ISO/IEC Guide 22 and EN45014. It identifies the product, manufacturer’s name and address, and applicable specifications recognized in the European community.

Declaration of Conformity

according to ISO/IEC Guide 22 and EN 45014

Manufacturer's Name:		Hewlett-Packard Company
Manufacturer's Address:		11311 Chinden Boulevard
		Boise, Idaho 83714-1021 USA
declares that the product
Product Name:		LaserJet 3300/3310/3320/3330 Series
Model Number:		C9124A, C9125A, C9126A, C9151A, C9709A
		(including Model C9143A ADF Accessory)
Product Options:		ALL
conforms to the following Product Specifications:
Safety:	IEC 60950:1991+A1:1992+A2:1993+A3:1995+A4:1996 /
	EN 60950:1992+A1:1993 + A2:1993 + A3:1995 + A4:1997 + A11:1997
	IEC 60825-1:1993 + A1:1997/
	EN 60825-1:1994 + A11:1996 Class 1 Laser/LED Product

EMC:

CISPR 22:1993 + A1:1995 + A2:1996 /

EN 55022:1994 + A1:1995 + A2:1997 Class B1) EN 61000-3-2:1995+A14:2000

EN 61000-3-3:1995

EN55024:1998

FCC Title 47 CFR, Part 15 Class B2) / ICES-002, Issue 2

AS / NZS 3548:1995 + A1 + A2:1997

TELECOM3) TBR-21:1998; EG 201 121:1998

Supplementary Information:

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and carries the CE-marking accordingly.3)

1)The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.

2)This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3)LaserJet 3330 (Model C9126A) contains fax functionality and is therefore compliant with the referenced telecom standards and the R&TTE Directive 1999/5/EC (Annex II) and carries the CE-marking accordingly.

Boise, Idaho USA

August 14, 2001

Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia.

European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE /

Standards Europe, Herrenberger Strasse 130, D-71034 Böblingen (FAX: +49-7031-14-3143)

USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015

(Phone: 208-396-6000)

228 Appendix A Specifications and regulatory information EN