HP 3300mfp manual All of the numbers in a long fax number cannot be dialed

All of the numbers in a long fax number cannot be dialed

The maximum number of digits or characters that can be entered into a fax number is 50. Try dialing the fax number in manual mode. See Using manual dial.

Unable to start receiving faxes from an extension phone

Is the extension phone setting disabled?

See Enabling an extension phone for instructions about changing this setting.

Is the telephone cord securely connected?

Check that the telephone cord is securely connected between the phone and the product (or other device connected to the product).

Press 1-2-3 in sequence, wait for three seconds, then hang up.

Voice calls are not being received by the phone or answering machine connected to the line

Is the phone cord connected properly?

See “Connecting the product to a phone line” in the fax guide that came with the product to check the installation. The product must be the first device connected to the phone line.

Are the answer mode and rings-to-answer settings set properly?

See Setting the answer mode or Changing rings-to-answer to determine which settings you need. The rings-to-answer must be set higher than for the answering machine.

Is the answering machine or phone functioning?

Connect the phone or answering machine directly to the phone line and determine whether it works by itself.

Incoming fax calls are not being answered

Is the answer mode set to manual?

If the answer mode is set to manual, the product never answers calls. You have to answer the phone and start receiving the fax yourself. See Setting the answer mode for more information.

Is the rings-to-answer setting set correctly?

Check the rings-to-answer setting for your configuration. See Changing rings-to-answer or refer to the fax guide that came with the product to determine which setting you need.

EN All of the numbers in a long fax number cannot be dialed 185