Place a sufficiently large jug (approx 1 litre) under the replace- able hot water nozzle (16) and open the steam/hot water tap (14) (Fig. 12).
RINSING
FILTER
CLOSE TAP
Open the steam / hot water
HEATING UP
READY
5.3 Changing the filter without display request
Press the Rotary Switch (1) until
FILTER appears.
Press the Rotary Switch (1) to confirm.
YES
Press the Rotary Switch (1) again to confirm.
INSERT/OPEN TAP
The program “Change filter” is now active. Now proceed as
described in Chapter 5.2 from REPLACE/OPEN TAP onwards.
6. Rinsing the IMPRESSA
When the IMPRESSA is switched off and has cooled down, a rinsing operation is started when the machine is switched on again. When the machine is switched off, a rinsing operation is started automatically.
Touch the symbol (3).
HEATING UP
PRESS MAINT.
Touch the symbol (7).
RINSING
READY
6.1 Rinsing the IMPRESSA without display request
Press the Rotary Switch (1) until
FILTER
Turn the Rotary Switch (1) until
MAINTENANCE appears.
Press the Rotary Switch (1) to confirm.
RINSE
Press the Rotary Switch (1) again to confirm.
RINSING
READY
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may deviate from the actual value
You can change/stop the water quantity during the
You can adjust the water quantity in steps of 5 ML using the Rotary Switch (1).
READY
Turn the Rotary Switch (1) until the required water quantity is displayed.
For example, 120 ML
10