Jura Capresso 13709 manual  Agent Tank,  Open TAP Agent in Tank,  DE-SCALING  Close TAP

When using the de-scaling agent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions.

In any case wait until the de-scaling agent is used up and the tank is empty. Never refill de-scaling agent.

 MACHINE CALCIFIED / MACHINE READY

Remove hot water nozzle/2-stage frothing jet.

Touch the symbol (7).

 EMPTY

TRAY

Empty the tray (20).

 NO TRAY

Insert the tray (20) again.

 AGENT

IN TANK

Completely dissolve the content of one blister (3 tablets) in a jug containing 0.5 litres of water, and fill the mixture in the water tank. Reinstall the water tank.

 OPEN TAP AGENT IN TANK

Put a sufficiently large container under the replaceable hot water nozzle (16).

Open the steam / hot water draw-off valve (14) (Fig. 12).

 DE-SCALING

 CLOSE TAP

Close the steam / hot water draw-off tap (14).

 DE-SCALING

 EMPTY TRAY

Empty the tray (20).

 NO TRAY

Insert the tray (20) again.

 FILL WATER

Rinse the water tank thoroughly and fill it with cold, fresh tap water. Install it again.

 OPEN TAP

Open the steam / hot water draw-off tap (14) (Fig. 12).

 DE-SCALING

	CLOSE TAP	E
 After you have closed the steam / hot water draw off tap (14),
	the following message is displayed
	DE-SCALING
	EMPTY
	TRAY

Empty the tray (20).

 NO TRAY

Insert the tray (20) again.

 PRESS MAINT.

Touch the symbol (7).

 RINSING

 READY

The de-scaling operation was completed successfully.

23