Jura Capresso 13709 manual Programming the automatic switch-on time

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until TIME is displayed.

 TIME

Now press the Rotary Switch (1) to start programming the time.

 --:--

Turn the rotary Switch (1) to adjust the hours..

 12:--

Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.

 12:--

Turn the Rotary Switch (1) to select the minutes.

 2:05

Press the Rotary Switch (1) to save the setting.

 TIME

Turn the Rotary Switch (1) until

EXIT appears

Press the Rotary Switch (1) to leave the programming mode.

 READY

If the machine is disconnected from power supply, the time must be programmed again.

15.7 Programming the automatic switch-on time

You must programme the time (Chapter 15.6) if you want to use the automatic switch-on function.

 READY

Press the Rotary Switch (1) until

FILTER – / appears

The illuminated ring (2) is active.

 Turn the Rotary Switch (1) until MACHINE ON is displayed.
	MACHINE ON
 Now press the Rotary Switch (1) to start programming the
	switch-on time.
	--:--
 Turn the Rotary Switch (1) to adjust the hours.
	12:--
 Press the Rotary Switch (1) to confirm the hour settings and to
	activate the minutes.
	12:--
 Turn theRotary Switch (1) to select the minutes.
	12:05
 Press the Rotary Switch (1) to save the setting.
	MACHINE ON
 Turn the Rotary Switch (1) until

EXIT appears E

Press the Rotary Switch (1) to leave the programming mode.

 READY

15.8 Programming the automatic switch-off time

You can programme your coffee machine such that it will switch off automatically after a certain time. You can pro- gramme the switch-off time in a range between 0.5 and 9 hours, or select ––:–– (i.e. inactive).

 READY

Press the Rotary Switch (1) until

FILTER – / appears

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until OFF AFT. HR is displayed.

17