Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly.
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your JURA coffee machine is not suitable for coffee beans which were treated, during or after roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs resulting from the use of such blends are not covered by warranty.
Open the bean tank cover (12) and remove the aroma preser- vation cover (13).
Remove any dirt or foreign matter from the bean tank.
Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We recommend
a fine grinding degree | for bright roasts (the smaller the dots, |
| the finer the grinding) |
a coarse degree | for dark roasts (the larger the dots, the |
| coarser the grinding) |
The grinding degree may only be adjusted while the grinding gear is running.
Open the bean tank cover (12) and remove the aroma preser- vation cover (13).
To adjust the grinding degree, turn the rotary switch (Fig. 2) to the required position.
2.6 Power switch
Actuate the power switch (24) on your IMPRESSA before using the machine for the first time.
We recommend that you switch off your IMPRESSA with the power switch (24) if you intend not to use the machine for longer periods of time (e.g.during holidays).
3. First use
Fill coffee beans in the bean tank (12).
Switch on the IMPRESSA using the power switch (24).
Your IMPRESSA is in standby mode.
Touch the 
(3) symbol
SPRACHE
DEUTSCH |
| E |
The illuminated ring (2) | is active. | |
Turn the rotary switch (1) until the required language is dis- |
| |
played (Fig. 17). |
|
|
For example | LANGUAGE |
|
| ENGLISH |
|
Confirm your selection by pressing the rotary switch (1) (Fig. 17).
FILL
WATER
Fill the water tank (10) with fresh water.
OPEN TAP
Place an empty cup under the replaceable hot water nozzle (16).
Open the steam / hot water
FILLING
SYSTEM
CLOSE TAP
7
