CLOSE TAP
Close the steam / hot water
READY
Before CLOSE TAP water may still escape the system.
12. Drawing off steam
To ensure perfect operation, clean the
Make sure the nozzle has engaged properly. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation.
Install the
Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the
During frothing some water will escape the system before the actual frothing process. This does not affect the result, e.g. when frothing milk.
At the start of the steam
READY |
|
| ||
Place a cup under the |
| |||
| the milk to be frothed or the liquid to be heated. |
| ||
To draw off steam, open the steam/hot water |
| |||
| (Fig. 12). |
|
| |
The illuminated ring (2) is active. |
| |||
STEAM |
|
| ||
You can adjust the steam |
| |||
| the rotary switch (1) until the required SEC are displayed. |
| ||
For example, | 35 SEC |
| ||
If you do not change the steam |
| |||
| rotary switch (1), the machine will use the settings last adjusted |
| ||
During the steam |
| |||
| displayed |
|
| |
When the steam quantity is reached, the message CLOSE TAP is | E | |||
| displayed |
| ||
Close the steam / hot water | ||||
|
READY
Before CLOSE TAP, steam may still escape the system.
13.Drawing off steam with the
The
13