Jura Capresso 13709 manual Switching off the IMPRESSA, 15.1, Programming the filter, 15.2

Fill water into a container (approx. 1/2 litre) and immerse the milk tube in it.

Place a sufficiently large vessel under the Professional-Cappuc- cino Frother or the Easy-Cappuccino Frother.

Draw steam until the water from the Professional-Cappuccino Frother or the Easy-Cappuccino Frother runs clean.

The Professional-Cappuccino Frother and the Easy-Cappuc- cino Frother are best cleaned using the JURA Auto-Cappuc- cino cleaner. Please contact an authorized dealer. We recom- mend cleaning these devices daily.

14. Switching off the IMPRESSA

In order to ensure perfect operation, please don’t switch off your IMPRESSA at the power switch (24) before all the symbols on the display (9) have gone off except for (3).

 READY

Switch off the IMPRESSA using the ON/OFF key (3).

 RINSING

An automatic rinsing operation is started.



Your IMPRESSA is in standby mode.

15. Programming

When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually.

You can programme the following stages:

Filter

Water hardness

Maintenance

Aroma

Temperature

Time

Automatic switch-on time

Automatic switch-off time

Draw-offs

Language

Display

Exit

To start programming, press the Rotary Switch (1) until

FILTER – / appears

Rotary switch

Turn the Rotary Switch to change the adjusted values or to select the next programming step.

Press the Rotary Switch to check the values adjusted or to

	save the values selected (Fig. 17).	E
15.1	Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
15.2	Programming the water hardness
Refer to Chapter 4 «Adjusting the water hardness».

15.3 Maintenance menu

 READY

Press the Rotary Switch (1) until

FILTER – / appears

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until

MAINTENANCE appears

15