16.6 Cleaning the IMPRESSA
After 200
CLEAN MACHINE / MACHINE READY
16.7 IMPRESSA calcified
During operation, the machine will calcify. The degree of scaling depends on the hardness of the water in your region. The machine will inform you when
MACHINE CALCIFIED / MACHINE READY
16.8 General cleaning instructions
Never use scratching objects, pan cleaners, cleaning sponges or caustic chemicals to clean the machine.
Wipe off the case on the inside and outside using a soft, moist cloth.
Clean the replaceable hot water nozzle after each use.
After heating milk, draw off some hot water, to clean the inside of the
Disassemble the
The water tank should be rinsed daily and refilled with fresh water.
If the water tank shows signs of scaling, remove the scaling using a commercial
Remove the Claris plus filter cartridge, if installed, before
16.9 Emptying the system
Precondition: IMPRESSA switched off
This operation is required to protect the IMPRESSA against frost damage during transports.
Place a container under the replaceable hot water nozzle (16).
OPEN TAP
Press the Rotary Switch (1)
EMPTYING
CLOSE TAP
The IMPRESSA is switched off.
17. Cleaning | E |
Your IMPRESSA features an integrated cleaning program. The cleaning operation will take some 15 min.
JURA cleaning tablets which are specially designed for the cleaning program of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate cleaning agents.
Once started, the
After each cleaning operation the filler funnel for
21