26
4 Permanent settings in programming mode
4 Permanent settings in programming mode Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Programme item Sub-item Explanation
‘Maintenance status
(1/5)’
‘Clean’,
‘Change the filter’,
‘Descale’ (only if filter
is not activated),
‘Rinse the milk
system’,
‘Rinse the coffee
system’,
‘Clean the milk
system’
T Start the required maintenance programme
here.
‘Product settings
(2/5)’
‘Expert mode’,
‘Set consistency of
grind’
T Select your settings for speciality coffees, milk
and hot water.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
‘Machine settings
(3/5)’
‘Maintenance
settings’ (filter, water
hardness, switch-on
rinse, milk system
rinsing),
‘Time/ date’,
‘Timer’,
‘Save energy’,
‘Units’,
‘Factory setting’
T Set the water hardness or activate the filter.
T Change the settings for the switch-on rinse and
milk system rinse.
T Set the time after which the GIGA should switch
off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently set
values of all products to the factory settings.
‘Machine settings
(4/5)’
‘Choose language’,
‘Display’,
‘Colour scheme’,
‘Café à la carte’,
‘Barista recipes’
T Select your language.
T Change the display settings.
T Activate the grinder selection.