30
4 Permanent settings in programming mode
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Maintenance set-
tings’ you can make the following settings:
U‘Filter’

UChoose whether to operate your GIGA with or without an

external filter cartridge or change the filter capacity.
U‘Water hardness’

UIf you do not have a filter cartridge, you will need to set the

water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U‘Switch-on rinse’/ ‘Manual’

UThe switch-on rinse must be started manually.

U‘Switch-on rinse’/ ‘Automatic’

UThe switch-on rinse is started automatically.

U‘Rinse the milk system’/ ‘Manual after 10min.’

UYou are prompted to rinse the milk system 10minutes after

preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ ‘Manual immediate’

UYou are prompted to rinse the milk system immediately

after preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ ‘Automatic after 10min.’

UMilk system rinsing is automatically initiated 10 minutes

after preparation of a speciality coffee with milk.
U‘Rinse the milk system’/ ‘Automatic immediate’

UMilk system rinsing is automatically initiated approx. 30 sec-

onds after preparation of a speciality coffee with milk.
Example:Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a speciality cof-
fee with milk.
Precondition:‘Please select product:’ is displayed.

Maintenance settings