28
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Caffè latte* ; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–290ml
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Temperature (low, normal,
high), grinder on the left
and/or right (as%)
Portion of milk
foam,
portion of milk*
– Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
–
Two portions of
milk foam,
two portions of
milk
– Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
–
Pot,
pot 2
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–290ml
(per stroke)
Temperature (low, normal,
high), grinder on the left
and/or right (as%), number
of strokes (1–5; set number is
displayed during preparation)
Hot water* – Water: 25ml–450ml Temperature (low, normal,
high)
(Products marked * are also available in ‘large’ size.)
EIn addition to the settings listed, you can reset the values for
all products to the factory settings.
Example:Proceed as follows in the ‘Expert mode’ to change the
amount of milk for a latte macchiato from ‘4sec.’ to ‘6sec.’, the
amount of milk foam from ‘12sec.’ to ‘14sec.’ and the amount of
water from ‘45ml’ to ‘40ml’.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
gT Turn the Rotary Switch until the programme item ‘Product
settings (2/5)’ is displayed.
T Press the ‘Expert mode’ button.
‘Expert mode’