35
4 Permanent settings in programming mode
gT Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
T Press the ‘Timer’ button.
T Press the ‘Next’ button.
T Press the ‘Switch off after’ button.
‘Switch off after’
T Press the ‘+’ or ‘–’ button to change the setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Timer’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Units’ you can
make the following settings:
UUnit for amount of water: ‘ml’ or ‘oz’ UTime format: ‘24hrs.’ or ‘AM/ PM’
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
gT Turn the Rotary Switch until the programme item ‘Machine
settings (3/5)’ is displayed.
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (3/5)’
O T Press the P button to exit programming mode.
‘Please select product:’

Units