29
4 Permanent settings in programming mode
ENext select the button of the product for which you would like
to make settings. No product is prepared at this point.
EYou can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the ‘Latte macchiato’ button.
T Press the ‘Amount of milk’ button.
T Press the ‘+’ or ‘–’ button to change setting for the amount
of milk to ‘6sec.’.
T Press the ‘Save’ button.
T Press the ‘Amount of milk foam’ button.
T Press the ‘+’ or ‘–’ button to change setting for the amount
of milk foam to ‘14sec.’.
T Press the ‘Save’ button.
T Press the ‘Volume’ button.
T Press the ‘+’ or ‘–’ button to change setting for the fill vol-
ume to ‘40ml’.
T Press the ‘Save’ button.
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings (2/5)’/ ‘Set consistency of
grind’ you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the dual spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
gT Turn the Rotary Switch until the programme item ‘Product
settings (2/5)’ is displayed.
T Press the ‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
Setting the consistency of grind