1 Preparing and using for the first time
gT Turn the Rotary Switch until HARDNESS 25°dH is dis-
played.
kT Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
HARDNESS
gT Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode. COFFEE READY appears on the display.
Adjusting the grinder | You can adjust the grinder on a continuous scale to suit the degree |
| of roast of your coffee. |
CAUTION If you adjust the consistency of grind when the grinder is not oper- ating, the grinder adjustment switch could be damaged.
TOnly adjust the consistency of grind when the grinder is run- ning.
The consistency of grind setting is correct if the coffee flows regu- larly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind dur- ing the preparation of an espresso.
T Open the cover of the bean container. T Place a cup under the coffee spout.
iT Press the Espresso button.
The grinder starts up. 1 ESPRESSO and the coffee strength are displayed.
T Turn the grinder adjustment switch to the desired position while the grinder is running.
The espresso is prepared and the consistency of grind is adjusted.
T Close the cover of the bean container.
17
