4 Permanent settings in programming mode
4Permanent settings in programming mode
You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the following settings with the Rotary Switch:
Programme item | Explanation | |
MAINTENANCE | CAPPUCCINO CLEAN, | T Select the desired maintenance |
| FILTER CHANGE (only if | programme. |
| filter is activated), MACHINE | If no action is taken in this pro- |
| CLEAN, CAPPUCCINO | gramme item, programming mode |
| RINSING, MACHINE | is exited automatically after |
| DESCALE (only if filter is | approximately five seconds. |
| not activated), MACHINE |
|
| RINSING |
|
|
|
|
PRODUCTS | PRODUCT / SELECT | T Select your settings for speciality |
| PRODUCT | coffees, milk specialities and hot |
|
| water. |
|
|
|
FILTER | YES, NO | T Indicate whether you are operating |
|
| your IMPRESSA with or without a |
|
| CLARIS Blue filter cartridge. |
|
|
|
HARDNESS | NOT ACTIVE, | T Adjust the water hardness. |
(only if filter is not | 1°dH – 30°dH |
|
activated) |
|
|
|
|
|
ENERGY | SAVE NO, | T Select an |
| SAVE LEVEL1, |
|
| SAVE LEVEL2 |
|
|
|
|
OFF AFTER | NOT ACTIVE, 15 MIN, | T Set the time after which the |
| 30 MIN, 1 HRS – 15 HRS | IMPRESSA should switch off |
|
| automatically. |
|
|
|
RINSES | START RINSE, | T Change the settings for the |
| CAPPU. RINSE | |
|
| rinse. |
|
|
|
RENAME | PRODUCT NAME, | T Change the individual texts. |
| ON MESSAGE, |
|
| CLOSING |
|
|
|
|
25