4Permanent settings in programming mode
E The maintenance status can also be displayed in addition to the number of performed maintenance programmes. The bar shows the current maintenance status. When the bar is com- pletely filled, your IMPRESSA will request the respective main- tenance programme.
k T Press the Rotary Switch to exit the programme item.
INFORMATION
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Unit for amount of water You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of water from ML to OZ.
Precondition: COFFEE READY is displayed.
| k | T Press and hold the Rotary Switch until MAINTENANCE |
|
| appears. |
| g | T Turn the Rotary Switch until SETTINGS / UNIT ML is |
|
| displayed. |
| k | T Press the Rotary Switch to enter the programme item. |
|
| SETTINGS / UNIT ML |
| g | T Turn the Rotary Switch until UNIT OZ is displayed. |
| k | T Press the Rotary Switch to confirm the setting. |
|
| CONFIRMED appears briefly on the display. |
|
| SETTINGS / UNIT OZ |
| g | T Turn the Rotary Switch until EXIT is displayed. |
| k | T Press the Rotary Switch to exit programming mode. |
|
| COFFEE READY |
Language | In this programme item you can set the language used by your | |
| IMPRESSA. | |
| Example: Proceed as follows to change the language from | |
| ENGLISH to DEUTSCH. | |
| Precondition: COFFEE READY is displayed. | |
| k | T Press and hold the Rotary Switch until MAINTENANCE |
|
| appears. |
34
