4Permanent settings in programming mode
gT Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Logo | You can choose which logo is displayed when the display is not |
| being used to display any other information. The available logos |
| include: |
U | JURA logo |
U | Animated coffee cup |
U | No logo (NOT ACTIVE) |
Example: Proceed as follows to display the JURA logo.
Precondition: COFFEE READY is displayed.
kT Press and hold the Rotary Switch until MAINTENANCE
appears.
gT Turn the Rotary Switch until LOGO is displayed.
kT Press the Rotary Switch to enter the programme item.
LOGO
gT Turn the Rotary Switch until LOGO / JURA is displayed.
k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display.
LOGO / JURA
gT Turn the Rotary Switch until EXIT is displayed.
kT Press the Rotary Switch to exit programming mode.
COFFEE READY / JURA
Restore factory settings In the programme item RESET you can reset various settings to their factory settings:
UPRODUCT
U The settings (amount of water, aroma, temperature etc.) for any product can be reset individually to the factory settings. The corresponding double product is reset to the factory settings at the same time.
UALL PROD.
U The settings (amount of water, aroma, temperature etc.) for all products are reset to the factory settings.
URESET ALL
U All customer settings are reset to the factory settings. Your IMPRESSA then switches off.
32