4Permanent settings in programming mode
Permanent settings in programming mode always follow the same model.
Example: Proceed as follows to change the amount of milk for a latte macchiato from 16 SEC to 20 SEC, the interval from 30 SEC to 20 SEC and the amount of water from 45 ML to
40 ML.
Precondition: COFFEE READY is displayed.
kT Press and hold the Rotary Switch until MAINTENANCE appears.
gT Turn the Rotary Switch until PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCT / SELECT PRODUCT
ENext select the button of the product for which you would like to make settings. No product is prepared at this point.
ETo change the setting for a double product, press the corre- sponding button twice within two seconds.
qT Press the Latte Macchiato button.
1 LATTE MAC. / COFFEE 45 ML
kT Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / COFFEE 45 ML
gT Turn the Rotary Switch until 1 LATTE MAC. / COFFEE
40 ML is displayed.
kT Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display. 1 LATTE MAC. / COFFEE 40 ML
gT Turn the Rotary Switch until 1 LATTE MAC. / MILK
16 SEC is displayed.
kT Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / MILK 16 SEC
gT Turn the Rotary Switch until 1 LATTE MAC. / MILK
20 SEC is displayed.
kT Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display. 1 LATTE MAC. / MILK 20 SEC
gT Turn the Rotary Switch until 1 LATTE MAC. / PAUSE 30 SEC is displayed.
27