Cleaning the machine
CAUTION
5 Maintenance
EIf you do not want to start changing the filter just yet, turn the Rotary Switch until CHANGE/ START NO is displayed. Press the Rotary Switch to exit the maintenance programme. The prompt to change the filter remains active.
cT Press the Maintenance button.
CHANGE FILTER / PRESS BUTTON T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter cartridge and extension piece.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the tank.
T Place a receptacle (at least 500 ml) under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the steam position n.
cT Press the Maintenance button.
FILTER RINS., water flows out of the frother.
EYou can interrupt rinsing of the filter at any time by pressing any button. Press the Maintenance button c to continue rins- ing of the filter.
EThe water may be slightly discoloured. This is not harmful to health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 500 ml. The IMPRESSA heats up and is once more ready for use.
After 220 preparations or 80
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
TUse only original JURA maintenance products.
39
