Connections
Do not connect the power cord until all other connections have been made.
•You can get better picture quality in the order — HDMI > Component video >
•Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a
•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (See page 29.)
•If your TV supports progressive video input, you can enjoy a high quality picture from the source of “USB MEMORY” by setting the progressive scan mode to active and connect your TV with the HDMI cord or component video cord. (See page 18.)
•You can use below terminals for each sources to see the picture on the TV.
Source | VIDEO 1 | VIDEO 3 | iPod | USB | |
Terminal | VIDEO 2 | MEMORY | |||
|
| ||||
HDMI | √ | — | — | — | |
COMPONENT VIDEO | √ | — | — | √ | |
√ | √ | √ | √ | ||
VIDEO | √ | √ | √ | √ |
To HDMI input |
|
HDMI cord (not supplied) | TV |
Center unit
To | To composite | To component |
input | video input | video input |
Align the 5 marks.
(not supplied)
or
Composite video cord (supplied)
Component video cord
(not supplied)
NOTE
•HDMI MONITOR OUT terminal passes through the signal from the HDMI input terminal (VIDEO 1 and VIDEO 2) selected as the source.
•COMPONENT MONITOR OUT terminal passes through the signal from the COMPONENT input terminal (VIDEO 1 and VIDEO 2) selected as the source.
•
•VIDEO MONITOR OUT terminal passes through the signal from the VIDEO input terminal (VIDEO 1, VIDEO 2 and VIDEO 3) selected as the source.
•Use an HDMI cable shorter than 5 m (15 ft).
•When you are playing HDCP
•If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.
9