Setting preferences
See page 29 for button locations.
: Other setting menu (OTHERS)
7RESUME (See page 25.)
You can activate or deactivate Resume Playback function.
7ON SCREEN GUIDE
You can activate or deactivate the
Setting the audio terminal
You can set the analog or digital audio input terminal to use with the source of VIDEO
NOTE
•Before you start the operation;
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1 Select “VIDEO 1”, “VIDEO 2” or “VIDEO 3” as the source.
(see page 16)
2 Press SETTING.
Example:
3 Press 5/Yto select the source you want to set.
• V1 A/D: For the source of VIDEO 1
• V2 A/D: For the source of VIDEO 2
• V3 A/D: For the source of VIDEO 3
4 Press 2/3to select the audio input terminal you want to use for the source selected in the above step.
Example:
•ANALOG: Signal from AUDIO jacks comes out of the speakers (see page 10 to 12).
•DIGITAL: Signal from DIGITAL IN terminal comes out of the speakers (see page 10 to 12).
NOTE
• If you press DVD 3or DVD 8 in the middle of the procedure, you cannot select ANALOG/DIGITAL by pressing 2/3. In this case, press the button for the current source (VIDEO1, VIDEO2 or VIDEO3) then press 2/3to select ANALOG/DIGITAL.
31