Connections
Do not connect the power cord until all other connections have been made.
Connecting the video components for the source of VIDEO 2
7To connect the video components for the source of VIDEO 2
• You can get better picture quality in the order — HDMI > Component video >
Digital coaxial audio cord (not supplied)
Center unit
|
|
| To digital coaxial | |
HDMI cord |
|
| audio output |
|
| To HDMI output |
| ||
(not supplied) |
| |||
|
|
| ||
RCA pin plug cord |
| To analog | DVD recorder, DVD player, |
|
(not supplied) | audio output | satellite tuner, VCR |
| |
|
|
| or game console |
|
| To composite | To | To component | |
| video output | output | video output | |
Composite video cord |
|
| ||
(supplied) |
|
|
|
|
|
| or |
|
|
Align the 5marks. |
|
Component video cord
(not supplied)
NOTE
•Unify the way of TV connection and that of video component’s (for example, connect a video component through
•The audio signal through the HDMI VIDEO 2 IN terminal is not reproduced on this system. The signal is reproduced on the TV connected with HDMI MONITOR OUT terminal.
•Use an HDMI cable shorter than 5 m (15 ft).
•When you are playing HDCP
•If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.
•When shipped from the factory, the source of “VIDEO 2” have been set for use with the AUDIO VIDEO 2 IN terminal for the audio connection. If you connect the components with digital coaxial audio cord, change the audio input (VIDEO 2) setting to “Digital.” (See page 31.)
•If you connect a
11