Operations for USB MEMORY
See page 21 for button locations.
Basic playback for USB MEMORY
7 To play a file in a USB mass storage class device
1 Connect a USB mass 
storage class device (see page 13) while the system is turned off.
2 Turn on the system. (see page 16)
3 Select “USB MEMORY” as the source. (see page 16)
4 Start playback.
On the remote control:
Press USB MEMORY 6.
On the center unit:
Press iPod/USB MEMORY
CONTROL ‹/8.
The operations of the files in a USB mass storage class device depend on the file types stored in the device.
For MP3/WMA/WAV files
The file control display (see page 24) appears on the TV screen.
For JPEG files
Each file (still pictures) is shown on the TV screen for about 3 seconds
For
Pressing TOP MENU or MENU shows the file control display (see page 24) on the TV screen during playback.
7Playback information on the display window
Example: When an MP3 file is played back
Signal and speaker indicators (see page 28)
File number
Group number
Elapsed playing time (hour:minute:second) (during playback only)*
*Each time you press DISPLAY, the elapsed playing time and the file information appears alternately.
JPEG file
File number
Group number
NOTE
•When several types of files are recorded on a device, select file type you want to play on the setup menu. (see page 30)
7To stop
Press 7.
7To pause
On the remote control:
Press USB MEMORY 6during playback.
On the center unit:
Press iPod/USB MEMORY CONTROL ‹/8during playback.
To continue playback, press the button again.
File type
NOTE
•You can also check the playback information using the on- screen bar. (See page 24.)
•When playback is stopped, the file type is shown on the display window instead of elapsed playing time.
7Screen saver
An image may burn in on a TV screen if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes (the screen saver function).
•Pressing any button will cancel the screen saver function.
•If you do not want to use the screen saver function, see page 29.
22